wire size
英 [ˈwaɪə(r) saɪz]
美 [ˈwaɪər saɪz]
线号
双语例句
- Wire the list size node to the totext node.
将listsize节点连接到totext节点。 - The repair instructions document "main wire harness" is divided into several chapters because of its size.
修理说明文档“主线束”非常大，因此被分成了多个章节。 - The paper machine also equiped with a hydraulic head box and a single forming wire and a slope two-roll size press device in the drying part.
该纸机同时配有水力式流浆箱、单长网，在干燥部设置一台斜列双辊式表面施胶机。 - The surface roughness of a part produced on a wire cut machine depends on the size of the sparks generated between it and the electrode.
在线切割机床上加工工件的表面粗糙度取决于工件与电极之间放电火花的大小。 - Cat's whiskers are very hard, like the wire, the energy of the hole size.
猫的胡子非常硬，像钢针一样，能量出洞口的尺寸。 - The tensile strengths vary tremendously with wire size.
拉抗强度随簧丝尺度的不同而发生显著的变化。 - Vibrating wire sensors with characteristics of high precision and small size have been widely used in monitoring for dam safety.
振弦式传感器具有精度高，体积小等优点，广泛用于大坝安全监测。 - We have already studied the effect of magnetic field, wire space, the size of readout pad and the distance between the pad plane and the wire plane on the performance of TPC. At the same time some important results are given for designing TPC.
研究了磁场、读出电极几何尺寸、灵敏丝距以及读出电极平面与灵敏丝平面之间的距离等参数对TPC性能的影响，给出了TPC的一些最佳设计参数。 - As the product of the intersecting of the fractal geometry and antenna technology, fractal-shaped wire antennas can increase the working band and reduce the size.
作为分形几何和天线技术交叉的产物，分形天线振子能够增加天线的工作频带、减小天线尺寸。 - The austenite deformation-recrystallization process during high-speed rolling of the high carbon steel wire have been simulated and calculated, and the austenite grain size of the rolling stock and the law of its variation pass-by-pass calculated by application of the physical metallurgy theory and experimental model.
结合高碳钢线材的生产实际，利用物理冶金理论和实验模型，对奥氏体的变形-再结晶过程进行模拟计算，计算出各道次的奥氏体晶粒尺寸并分析变化规律。 - The experimental results show that the molten droplet size presents normal distribution between 1 and 2 times of wire electrode diameter. The excessive large or small size in molten droplet are all unfavorable to the stability of welding process in short-circuit transfer mode.
结果表明，熔滴尺寸呈分散性较大的正态分布（1~2倍焊丝直径），过大或过小的熔滴尺寸均不利于短路过渡焊接过程的稳定性。 - Numerical Control Wire Cutting Processing Technology for Die& Mould with Overrange Size
超行程模具的数控线切割加工工艺 - In the process of high speed wire-rod milling, micro-tension and automatic loop control are usually used, to assure the precision of wire sectional size, and to increase the productivity and the wire quality.
在高速线材生产中，大都采用微张力和自动活套控制，以保证轧材断面尺寸精度，提高生产效率和产品质量。 - The diameter of the wire is smaller, the average size is smaller;
粉末粒度随金属丝直径减小而变小； - The 0.3 ( kg/ t) aluminum wire was feeding after sulphur wire feeding to fine the grain size of steel.
喂硫线后，再喂入0.3kg/t的铝线，细化钢的晶粒。 - It researched the computer aided comprehensive design method of three-phase induction motor, such as how to decide the guage of wire, how to decide the size of slots and more importantly, how to adjust the scheme automatically.
对三相感应电动机的计算机辅助综合设计进行了研究，探讨了自动选取线规和和自动确定槽形尺寸的问题，重点研究了设计方案的自动调整方法。 - Analysis on Agricultural Submerged Electric Wire and Determination on Technology Control Requirement of Its Shape Size
浅析农用直埋电线及其外形尺寸工艺控制要求的确定 - By combining the near-field preconditioning technique with hybrid physical optics-method of moments ( PO-MoM), a novel technique is proposed for analyzing the radiation problems of wire antennas mounted on complex platforms with electrically large size.
提出了一种将近场预条件技术与物理光学矩量法（POMoM）相结合的新技术，并应用于分析电大尺寸复杂载体上线天线的辐射问题。 - To introduce the matters needing attention in the test for binding force of bead wire with rubber, which are shown from designing of die, thinning of size, cutting of steel wire specimen, size packing in die and taking steel wire out etc
介绍在胎圈钢丝与橡胶粘合力试验中应注意的事项，从模具设计、胶料的薄通、钢丝样品的截取、胶料的装模操作及钢丝的抽出等几个方面进行了说明 - This paper analyzes design targets and parameters of pad, pad hole, PC wire, shape, size and arrangement in automatic wavecrest soldering of PCB in detail.
本文对波峰自动焊接中印制板的焊盘、焊盘孔、印制导线及其形状、尺寸以及分布等设计指标和参数作了较详细的分析。 - After the arc has been buried, the arc column gas atmosphere is changed and the concentrated arc on the wire tip becomes a covered one, which makes the droplets size smaller and the droplet transfer form change.
潜弧后弧柱气氛改变，焊丝端部的弧根由集中形态扩展为覆盖整个端部形态，使得熔滴尺寸变得细小，熔滴过渡形式发生变化。 - High carbon steel wire has strict requirements on molten steel cleanliness, size, distribution and shape of inclusions, in which, metallic inclusions in steel is one of important factors.
高碳硬线盘钢制品对钢的纯净度，夹杂物的尺寸、分布以及形态都有严格的要求，其中非金属夹杂物是影响高碳硬线钢质量的重要因素之一。 - Based on the analysis of the impact of foil electrode and wire electrode, on the machining gap size and flow field distribution in precision electrochemical machining ( ECM) of narrow groove, wire electrode with small diameter is adopted to improve the machining accuracy and process stability.
通过在理论上分析窄缝电解加工中片状电极和丝状电极对加工间隙和流场分布的影响，提出了采用小直径丝状电极提高加工精度和改善加工稳定性的方法。 - Ground anchor piles that fix workover derrick wire, whose installation location, installation size and ultimate capacity of pulling on workover rig has very important effects.
固定修井机井架绷绳的地锚桩，其安装位置及安装数量对修井机井架承载能力都有十分重要的影响。 - Welding parameters such as angle of bending tip, pulse voltage, wire feed rate, pulse mode, size of groove and welding speed can affect the appearance of weld.
导电嘴弯曲角度、送丝速度、峰值电压、协同模式、焊接速度和坡口尺寸均会对窄间隙焊缝成形产生重要影响。 - The elastic modulus of the surface layer does not change with a decreasing nanowire size whereas the elastic modules of core layer decrease with a decreasing wire size, leading to the fact that the overall elastic modulus of nanowires decreases as the diameter decreases.
结果表明，金属纳米线的弹性模量具有尺度效应，随着直径减小，整体弹性模量减小，主要是因为核心层弹性模量减小，表面层弹性模量变化不大。 - Adding metal wire can increase the current path to reduce the size of the antenna.
添加金属线可以增加天线电流的流经路径，减小天线尺寸。 - The telescopic multi-stage telescopic boom driven by fuel tank and steel wire rope synchronization system with a small size, light weight advantages, especially suitable for operation in narrow space.
油缸钢丝绳同步伸缩系统驱动的多级箱型伸缩臂具有尺寸小、重量轻的优点，特别适宜于狭小空间内作业。